topic Re: PCV-RX201 in PCs & Accessories https://community.sony.ee/t5/pcs-accessories/pcv-rx201/m-p/37125#M24355 <HTML><HEAD></HEAD><BODY><P>I remember quite a long time ago reading that this sort of thng might relate to master/slave settings on the device. try checking what the jumper settings were on your old CD/DVD drive and set the new one to the same. You could also try plugging the drive into a different ide cable if you have a spare. <BR /><BR />teve<BR /></P></BODY></HTML> Mon, 12 Feb 2007 23:11:58 GMT Teve 2007-02-12T23:11:58Z PCV-RX201 https://community.sony.ee/t5/pcs-accessories/pcv-rx201/m-p/37123#M24354 <HTML><HEAD></HEAD><BODY><P>Hi All<BR /><BR />I have a Sony Vaio PCV-RX201 runnings Windows XP Home SP2. <BR /><BR />I'm trying to replace the DVD-ROM drive that came with the system with a Philips DVD Rewriter (SPD2410BD). The drive is detected ok when booting up. However, the system runs<BR />very slow and unable to read / write to DVDs<BR /><BR />Any help would be appricated.<BR /><BR />Kevin<BR /></P></BODY></HTML> Wed, 07 Feb 2007 09:12:06 GMT https://community.sony.ee/t5/pcs-accessories/pcv-rx201/m-p/37123#M24354 kevin.hart 2007-02-07T09:12:06Z Re: PCV-RX201 https://community.sony.ee/t5/pcs-accessories/pcv-rx201/m-p/37125#M24355 <HTML><HEAD></HEAD><BODY><P>I remember quite a long time ago reading that this sort of thng might relate to master/slave settings on the device. try checking what the jumper settings were on your old CD/DVD drive and set the new one to the same. You could also try plugging the drive into a different ide cable if you have a spare. <BR /><BR />teve<BR /></P></BODY></HTML> Mon, 12 Feb 2007 23:11:58 GMT https://community.sony.ee/t5/pcs-accessories/pcv-rx201/m-p/37125#M24355 Teve 2007-02-12T23:11:58Z